A state-of-the-art building in Lugo chooses Dekton to clad its complex façade

34 dwellings with two, three or four bedrooms, two bathrooms, kitchen and living-dining room. This is the main layout of the Aresa building, built in Lugo under the direction of the architect Jesús Quiroga López. The building also has three basement floors for parking and storage, and a ground floor with an empty commercial space, storage and service rooms, and general access to the dwellings.

“The interior layouts of each floor show significant differences in relation to the number of dwellings or their typology, which results in differences in the exterior volume”, says Quiroga.

“This has led us to reflect these structural differences on the façade, generating small variations in the openings, depending on the specific floor. The result is a state-of-the-art façade with vertical openings and similar rhythms and proportions that reflects the interior of the building, using new and trendy materials. Its impact on energy savings and the lower building demand will also be significant”, Quiroga further says.

Quiroga points to the many advantages of the building’s ventilated façade, consisting of aluminium profiles, 80 mm rock wool, waterproof membrane, air gap and exterior cladding in 8 mm Dekton Aeris, Eter and Keranium with visible clips.

Among the three colours used on the façade, the most prominent is Dekton Aeris, a light neutral shade with subtle cream touches reminiscent of White Limestone. To create contrast and bring an air of modernity, Aeris was combined with Dekton Eter, a colour with a dark granite background in black and grey tones, and with Dekton Keranium, a powerful, trendy colour with industrial and technological reminiscences.

Thanks to this cladding, the maintenance of the building will be minimal, as Dekton is highly resistant to UV rays and to freezing and thawing, ensuring that it will remain intact for decades (in fact, it comes with a 10-year commercial warranty).