Projects with horizontal hierarchy.

Mixed fixing (mechanical plus chemical) hidden in the groove by the reverse side of the piece

Sculptural projects with high formal value. For designs with contorted shapes or where varying and complex pieces meet, co-existing alongside inclined, horizontal or vertical pieces. It is essential to find a system that absorbs the whole technical and formal burden of the building, together with a sufficiently adaptable system for all of these configurations.

Bildnummer 15 des aktuellen Abschnitts von DKM System von Cosentino Deutschland

Beschreibung

DKM is a system of hybrid fixing (mechanical supported by chemical). It consists of two hanging profiles (upper and lower) that anchor the material chemically and mechanically using adhesive and an inclined or straight groove of a shorter or longer length on the back of the piece.

The resulting metallic piece incorporates a hook that is attached to the uprights of the sub-structure, ensuring the stability of the whole against heavy weights. Although it is possible to use different thicknesses, the most used is DKTN 12 mm due to its high versatility, manageability on site, lower weight and high mechanical resistance.

Bildnummer 16 des aktuellen Abschnitts von DKM System von Cosentino Deutschland

Detail 1. Vertical section

Bildnummer 17 des aktuellen Abschnitts von DKM System von Cosentino Deutschland

Detail 2. Horizontal section

Bildnummer 18 des aktuellen Abschnitts von DKM System von Cosentino Deutschland

Detail 3. Vertical section

Bildnummer 19 des aktuellen Abschnitts von DKM System von Cosentino Deutschland

Detail 4. Horizontal section

1. DKTN | 2. Upper Hanging Profile | 3. Lower Hanging Profile | 4. Horizontal Profile | 5. Vertical Profile | 6. Separator 'L' | 7. Self-Propelling Screw | 8. Mechanical Anchoring | 9. Thermal Insulation | 10. Supporting Wall

DKM Projects

DKTN responds very well under flexural stress from the traction exerted onto the material (≥45 N/mm2). In addition, it is extremely easy to work with for grooving on the back of the material (various angles of inclination,

different lengths of anchoring, etc.), which allows for special designs with personalised shapes or large formats that seek to boost the scale or colour of the shape.

Beyond the wall

Bildnummer 20 des aktuellen Abschnitts von DKM System von Cosentino Deutschland

Benötigen Sie bei einem Projekt Hilfe?

Contact our specialists for advice

Benötigen Sie bei einem Projekt Hilfe?

Contact our specialists for advice

Other construction systems

Bildnummer 21 des aktuellen Abschnitts von DKM System von Cosentino Deutschland

DKT1

Projects with complex cutting

Bildnummer 22 des aktuellen Abschnitts von DKM System von Cosentino Deutschland

DKT 2

Projects with horizontal hierarchy.

Bildnummer 23 des aktuellen Abschnitts von DKM System von Cosentino Deutschland

DKT 3

Projects designed to the last detail.

Bildnummer 24 des aktuellen Abschnitts von DKM System von Cosentino Deutschland

DKT 4

Projects with modest resources.

Contact us!

If you would like to receive a free sample or tailored advice, please fill in the form.