Image 32 of Xeron Kitchen F Misty Silver.jpg?auto=format%2Ccompress&ixlib=php 3.3 in Maintenance | Xeron - Cosentino

Xeron maintenance

Here you will find the best advice to keep your Xeron surface as good as new for years.

Xeron, Cosentino's surface with zero crystalline silica* content, is a compact surface made with up to 88% recycled materials that is highly resistant to stains, scratches or impacts. Its low porosity prevents liquids from penetrating inside, facilitating daily maintenance in any interior application.

Xeron means versatility for indoor spaces, from kitchen to bathrooms and furniture, with 10-year guaranteed** resistance and durability.

* The product is designed to be devoid of crystalline silica. Nonetheless, it might contain traces (less than 1%) of crystalline silica impurities. Safety information and safety data sheet available at oshxeron.cosentino.com.

** Please review XERON warranty policy for more detailed information at cosentino.com/en-au/xeron/warranty/.

Image 33 of img dekton 2 red.png?auto=format%2Ccompress&ixlib=php 3.3 in Maintenance | Xeron - Cosentino

Routine Cleaning and Maintenance

Cosentino recommends using Q-Action* to clean its Xeron® surfaces. If you don’t have this product, the best option is to use water and neutral soap. You should then finish off by rinsing the surface with plenty of water and drying it with kitchen paper or a clean cotton dishtowel.

Cleaning Stubborn Stains

When faced with stubborn stains, the best way to fix it depends on the type of stain. The most usual cases are:

Grease Stains

Apply Q-Action or similar (dishwash liquid) onto the stain and rub it with a blue scouring pad or sponge until it disappears. Repeat the process if necessary. Next, rinse with a generous amount of water and dry the affected area.

Limescale

Use cleaning vinegar and a blue scouring pad or damp sponge. If the stain persists, you can use a limescale remover that has been diluted with water. Never leave it on for more than 2 minutes. Repeat the process if necessary. Rinse with plenty of water and dry with paper towel or a clean cotton dishtowel.

Silicone and Putty Stains

We recommend you remove the stains as soon as they appear. To do so, use a knife held horizontally and and scrub with a blue sponge and silicone remover. Afterwards, rinse with plenty of water and dry.

Other Difficult Stains

For difficult stains, pour some Q-Action (or a similar product) onto the affected area and leave for 2 minutes. Next, scrub with a gentle blue scouring pad (for glass-top cookers, non scratch), rinse with plenty of water and dry. If the stain persists, contact the fabricator or reseller who supplied you with your Xeron® materials.

Food

Product: Neutral Soap + Water | Tool: Wet Dish Cloth

Ink

Product: Alcohol Etilic* | Tool: Roll Paper

Other Stains

Product: Hydrogen peroxide or oxygenated cleaners containing a maximun concentration of hydrogen peroxide of 5,5% w/w. ** | Tool: Wet Sponge

Oxid/Metal

Product: Hydrochloric Acid* | Tool: Roll Paper

* Do not apply directly on the stain. Apply to the paper towel and then treat the stain.
** Leave on the surface for 10 minutes and clean with a sponge moistened with water.