The technical challenge of bringing an old New York façade back to life

By MZA Architects

Numéro d'image 32 de la section actuelle de Manhattan facade 7 West 51st de Cosentino France


New York, United States




Danae | Edora | Borea


Façade | Lobby floor | Interior walls


MZA Architects | Stone Truss Systems as fitters

Date de fin



5,586 sq. ft.


12 mm

The three dimensions of a renovated façade

At the end of 2019, the remodelling of an office building situated at 7 W 51st street in Manhattan was successfully completed. The design team responsible for the project, MZA Architects, planned a comprehensive renovation of the façade aimed at achieving a high-impact visual change. At the same time, the project aimed to find a technically feasible solution to the problem of dealing with an old structure in a dubious state of repair.

Both the architect and the developer visited Cosentino City New York to see first-hand Dekton’s technical and design possibilities for large outdoor surfaces. That first visit was enough to convince them of the suitability of Dekton for their project. They even chose three colours that matched the desired design concept. For the exterior façade they opted for Dekton Danae, a beige tone from the Natural Collection reminiscent of the sandy beach. For the lobby floor, they chose Dekton Edora, a shade in the same beige colour range as the façade, which creates a visual continuity between the exterior and interior of the building. Finally, for the interior walls of the building they chose Dekton Borea, a material reminiscent of wenge wood, which adds the stylish touch they were looking for in the renovation.

The result creates a balanced and warm look, in tan colours, which contrasts with the coldness of the typical black and white buildings of 1990s Manhattan.

“Dekton is undoubtedly the perfect fit for ventilated façades. It is as if Dekton was invented solely for this purpose”
Stephen Falk

Stephen Falk

Stone Truss Systems

Cut-to-size Dekton versatility

Having solved the first structural challenge, it was time to install Dekton and face the next challenges. For example, all corner details were made using mitres bonded to the panels, so they had to be perfectly manufactured and installed neatly taking into account adjacent panels. The different façade plans required detailed and meticulous manufacture.

Dekton can adapt to any system, and this project was no exception. For this project, Stone Truss Systems used KEIL stainless steel back anchors and placed a carbon mesh bonded to the slabs. They also used TS-179 aluminium horizontal wall rails, which were fixed to the substructure with anchor clips. In short, a masterpiece of construction that made it possible to install Dekton slabs firmly, without compromising the beauty of the original design.

The new façade of this building in the Diamond District, just a stone’s throw from Rockefeller Center, gives it an incredible look and makes it the envy of all its neighbours.

Matériaux Cosentino utilisés dans ce projet

Projets phares connexes

Numéro d'image 57 de la section actuelle de Manhattan facade 7 West 51st de Cosentino France

Voulez-vous connaître les possibilités de Dekton pour réaliser des façades ?

Formulaires professionnels

Avez-vous besoin d’informations ou d’échantillons de nos matériaux ? Souhaitez-vous établir une relation professionnelle avec Cosentino ?

Demandez des devis