Case Study

DKTN facilitates the sustainable renovation of the Cajamar Group building

Arapiles Arquitectos Asociados

Numero immagine 32 della sezione corrente di Cajamar di Cosentino Italia

Location

Almería, Spagna

Materiale

DKTN

Colore

Sirocco | Danae | Kadum

Quantity

4.500 m2

Architecture/design

Arapiles Arquitectos Asociados

Application

Ventilated façace | Indoor flooring | Outdoor flooring | Wall and lift cladding | Panelling and bathroom walls

Spessore

12 mm

A visual impact of over 4,500 m2 of DKTN

The Cajamar building, located in southern Spain, is an ambitious architectural project. Its most interesting architectural feature is the aesthetic contrast created by three different types of façade: a large white volume of GRC photocatalytic panels, a Sirocco-colour DKTN ventilated façade, and a curtain wall protected by ceramic slats.

The aesthetic continuity of the building is another distinguishing feature. This effect is achieved thanks to DKTN’s outdoor flooring, in Danae colour, which is also discretely and elegantly used inside the building, cladding all the public access areas.

DKTN allows a continuous design, cladding all the walls of the building as if it were a second skin. Its high resistance to ultraviolet rays, freezing and thawing, its colour stability and its high resistance to stains make DKTN the perfect choice for exterior façades.

A floor designed to avoid the ‘heat island’ effect

The hue of the outdoor flooring had to be clear, with a Solar Reflectance Index (SRI) >78, to avoid the ‘heat island’ effect. Inspired by Roman travertine, Danae DKTN, a creamy matt finish colour, was perfectly suited to the building’s technical requirements.

The decision to use Danae DKTN indoors as well achieved the differentiation between the busiest and less used areas. Visually, you can see how the material flows from the outside to the interior areas, including the staircases, offering both warmth and consistency in design.

Thanks to the large size of the DKTN slabs, it is possible to create an image of great quality and beauty in the spaces where the material is used. From a functional point of view, its hardness and resistance to the wear and tear produced by constant traffic of people, make it a perfect product even for the busiest areas. Furthermore, its easy daily maintenance is a significant feature for busy buildings.

Hai bisogno di aiuto con il tuo progetto?

Contatta i nostri specialisti per una consulenza

Hai bisogno di aiuto con il tuo progetto?

Contatta i nostri specialisti per una consulenza

A project designed from a sustainable perspective

The new Cajamar headquarters has been awarded the LEED GOLD certification for sustainable buildings, granted by the US Green Building Council. This certification, issued by a specialised and independent agency, certifies that the building meets the highest standards of efficiency for sustainable buildings. It includes aspects related to energy efficiency, use of alternative energies, improvement of indoor environmental quality, efficiency of water use, development of sustainable open spaces and selection of the materials used.

Cosentino’s materials used in this project

Sirocco-1

Sirocco

DKTN
danae-dekton-1

Danae

DKTN
Numero immagine 71 della sezione corrente di Cajamar di Cosentino Italia

Do you want to know the possibilities of DKTN in facades?

Modulo Professionisti

Hai bisogno di informazioni o di campioni di uno dei nostri materiali? Desideri instaurare un rapporto commerciale con Cosentino?

Ricevi preventivi