DKT4 System

Mechanical fixing using visible staple that holds the pieces

Projects with modest resources. Making the exterior constructive elements visible is another expressive route taken by modern architecture. The building does not try to hide its structures, facilities, profile system… Instead, it shows off all the complexity of its construction in an honest way.

Numero immagine 32 della sezione corrente di DKT4 System di Cosentino Italia

Descrizione

In the DKT4 system of visible fixing, the piece is shown as it is, with the fastening tabs of the upper and lower pieces visible to the eye. The staples hold both pieces and keep them in line with the plane of the facade, as well as maintaining the distances (joints) between consecutive pieces.

Although this type of fixing is fairly flexible in adapting to the thickness of the material, it is ideal for the smaller sizes, lighter weights and smaller thicknesses.

Numero immagine 33 della sezione corrente di DKT4 System di Cosentino Italia

Detail 1. Vertical section

Numero immagine 34 della sezione corrente di DKT4 System di Cosentino Italia

Detail 2. Horizontal section

Numero immagine 35 della sezione corrente di DKT4 System di Cosentino Italia

Detail 3. Vertical section

Numero immagine 36 della sezione corrente di DKT4 System di Cosentino Italia

Detail 4. Horizontal section

1. DKTN | 2. Stainless Steel Staple | 3. Pressure Spring | 4. Vertical Profile | 5. Self-Propelling Screw | 6. Separator 'L' | 7. Mechanical Anchoring | 8. Thermal Insulation | 9. Supporting Wall | 10. Aluminium Jamb | 11. Padding | 12. Rupture of Thermal Bridge | 13. Corner Profile in L | 14. Adhesive | 15. Profile of Joint

Hai bisogno di aiuto con il tuo progetto?

Contatta i nostri specialisti per una consulenza

Hai bisogno di aiuto con il tuo progetto?

Contatta i nostri specialisti per una consulenza

Altri sistemi di costruzione

Numero immagine 37 della sezione corrente di DKT4 System di Cosentino Italia

DKM

Sculptural projects with high formal value.

Numero immagine 38 della sezione corrente di DKT4 System di Cosentino Italia

DKT 1

Projects with modest resources.

Numero immagine 39 della sezione corrente di DKT4 System di Cosentino Italia

DKT 2

Projects with horizontal hierarchy.

Numero immagine 40 della sezione corrente di DKT4 System di Cosentino Italia

DKT 3

Projects designed to the last detail.

Biblioteca di risorse digitali

Risorse digitali

BIM Material Library .zip/.rar 45,7 MB
Scarica
DKTN Ventilated Facade Systems .zip/.rar 10,6 MB
Scarica
VRay Material Library .zip/.rar 13.7 GB
Scarica

Sistemi di attacco

Curtain Wall Details for DKTN Ultracompact Surface by Cosentino .pdf 1 MB
Scarica
DKB System .zip/.rar 5 MB
Scarica
DKC System .zip/.rar 42 MB
Scarica
DKR System .zip/.rar 5 MB
Scarica
DKS System .zip/.rar 6 MB
Scarica
DKT1 System .zip/.rar 4 MB
Scarica
DKT2 System .zip/.rar 800 KB
Scarica
DKT3 System .zip/.rar 23 Mb
Scarica
DKT4 System .zip/.rar 9 MB
Scarica
Systems depending on the thickness of DKTN .zip/.rar 3 MB
Scarica
Technical Manual (EN) .pdf 24 MB
Scarica
Technical Manual (EN) (Pocket) .pdf 14.6 MB
Scarica

Schede prodotto

Declaration of Performance .pdf 4.8 MB
Scarica
Safety Data sheet DKTN .pdf 600 KB
Scarica
TDS DKTN Slim .zip/.rar 200 KB
Scarica
Technical Data Sheet DKTN .pdf 600 KB
Scarica
Use and Care DKTN Facades .pdf 1.5 MB
Scarica

Tender texts

Note for DKTN panel supply .pdf 90 KB
Scarica
Service Provision Condition for Facades (SPC) .pdf 200 KB
Scarica
Technical Conditions for Facades (TCF) .pdf 200 KB
Scarica
Tender Text Direct adhere facade and ethics .pdf 150KB
Scarica
Tender Text Ventilated facade .pdf 150KB
Scarica

Contact us!

Se desideri ricevere un campione gratuito o un consiglio personalizzato, compila il modulo.