VoltarCosentino Flagship Project
O revestimento de fachada ultrafino dá ao Zeeduin um efeito levemente flutuante
By Ignace Deconinck
Local
Nieuwpoort, Belgium
Material
Dekton
Cor
Nayla
Quantidade
462 m2
Arquiteto designer
Ignace Deconinck
Aplicação
Fachada ventilada
Espessura
4 mm
Dekton, insulation, aesthetics and durability for facades
O projeto de renovação Zeeduin está situado na esquina da Franslaan com a Lefebvrestraat em Nieuwpoort. Depois de algumas décadas, as fachadas - cobertas com elementos de concreto de silex pré-fabricados relativamente finos - mostraram danos no concreto devido à carbonatação. O cliente e arquiteto optaram pela renovação total das fachadas, com placas Dekton Slim de 4 mm de espessura da Cosentino, coladas sobre estrutura de suporte de alumínio ventilado.
O prédio de apartamentos data da década de 1970 e possui 6 andares acima do solo. Os terraços das galerias, em concreto in situ com laje de dentro para fora sem interrupção térmica, foram equipados com ladrilhos de argamassa. A penetração da água causou danos ao concreto e degradação geral do revestimento. A ausência de isolamento de fachada e telhado também contribuiu para uma renovação total.
Dekton Slim, 4mm full of possibilities
A light façade cladding had to give the building a new, sleek and contemporary zest. This resulted in the choice of Dekton Slim plates (with a thickness of 4 mm), glued to an aluminium carrier. “This way the façade could be insulated to a maximum without bringing the façade surface too far forward,” according to the architectural engineer Ignace Deconinck of the eponymous Architecten Expertisebureau from Veurne.
A small balcony construction with a walking zone was provided for the apartments on the façade corner - with in the original condition only a balustrade in the façade surface. Not evident from a technical point of view. Good coordination (including dimensions and planning) between the main contractor (Aquastra), the balustrades subcontractor (Aluform) and the façade cladding subcontractor (Murex Stone) was required. After concrete repair, the gallery terraces were fitted with a new reinforced terrace compaction system and glass balustrades with front mounting of the uprights.
Precisa de ajuda com um projeto?
Entre em contato com nossos especialistas para obter orientação
Precisa de ajuda com um projeto?
Entre em contato com nossos especialistas para obter orientação
``Dekton delivers high-quality and a great technical performance compared to other existing surfaces``
Stephanie Bevernagie
Cosentino Belgium
Nayla, an off-white full of nuances
The architect opted for a dark-coloured base (the ground floor) and a light superstructure to give the floors a more floating effect. “For the ground floor, we opted for a coating in fired blue bluestone, a good match with the small grey speckles, the white mass of the Nayla type and the terrace floors in a grey tone,” says Deconinck about the choice for the Dekton colour “Nayla” (white speckled).
“Thanks to its properties, Dekton delivers high-quality, technical performance compared to other existing surfaces: highly scratch-resistant, frost-resistant and thaw-resistant, and resistant to salty air and UV rays. Colour stability, dimensional stability and pressure resistance are high. With a fire reaction class A2, s1-d0, Dekton can even be used for tall buildings,” says Stephanie Bevernagie of Cosentino.
Materiais da Cosentino usados neste projeto
Projetos principais relacionados
