Sensa cleaning and maintenance
Sensa maintenance – FAQs
Due to the high absorption capacity of the product (up to 5 mm), no action would be required in most cases. Only in extreme cases, should the product be re-applied. In any case, it is advisable to have this task carried out by a specialist in order to achieve the best results.
Do not place very hot objects directly on the worktop. It is recommended to use trivets when placing hot objects on the surface in order to avoid damaging the stone.
The scratch has left a metal mark on the surface. So cleaning is needed to get the metal stain out. To do this, dilute a metal cleaner with water and use the mixture with a wet blue scouring pad (always in a circular motion). You can also use cleaning vinegar or an anti-limescale product.
Yes, Sensa can be used for both flooring and wall cladding. But please note that due to the anti-stain treatment of the stone, in flooring areas with high traffic, it will eventually deteriorate.
The use of bleach or other aggressive cleaning products is not recommended.