Dekton: Dekton, resistant and versatile flooring
Choosing the right paving is essential. The demand for spaces with ample visual continuity and fluidity, and material which does not lose its charm and remains unchanged over time, increases every day. Dekton is the product that best meets all the needs of professionals.
Suitable for extreme temperatures, with the minimum number of joints (large format) and ideal for high-traffic spaces.
Large format to reduce joints; suitable for high traffic and infinite cutting possibilities for any space.
Pools and spas, indoor or outdoor. Dekton and its large format can meet any challenge.
Due to its thermal conductivity and mechanical properties, Dekton is ideal for bright and elevated floors.
Dekton is specially designed for use in exterior, interior and wet spaces
Its high-performance physical-mechanical characteristics allow the product to be applied with total safety and confidence in exterior, interior and wet spaces, such as swimming pools and spas.
High resistance to ultraviolet rays
UNE EN ISO 106
Maximum fire and heat-resistance
Resistance to thermal shock
Reduced water absorption
Design, installation and maintenance
Maintenance and Safety
Thanks to its dimensions of 3,200 x 1,440mm, Dekton offers the possibility of producing the material in an infinite number of formats. Can be adapted for any required use.
Suggested formats, taking into account the total size of the table for maximum product use.
Dekton options for thickness: 8mm / 12mm / 20mm
Private Areas/Pedestrian Use: in general, in private areas exclusively for pedestrian use, we can choose the thickness and design of the form freely and with no restrictions.
Public spaces mainly for pedestrians: For public spaces that are mainly pedestrian or with occasional vehicles, 12mm and 20mm thickness is ideal, and can be free in format. For 8mm, we recommend the use of square formats, as it improves performance in the case of possible unevenness of the substrate.
Spaces with vehicle traffic: For spaces with vehicle traffic, even taking into account the calculation of loads required, our ideal thickness is 20mm.
The placement joints are an essential element for the quality, durability and good performance of the flooring.
It is recommended that you have a joint of 2mm in interiors and 3mm for exteriors, and always respect the structural joints, expansion or movement of the building.
The stability of the supports, the environmental conditions, the requirements for use and the properties of the selected grouts and sealing materials will be of great importance for the design of the joint.
Dekton is prepared to respond to all the irregular points of a floor.
Dekton can be manufactured in strips to create a skirting board that gives continuity to the surface, respecting the aesthetics of the floor and also providing the same technical characteristics and maintenance to this piece.
The corners must be designed taking into account the mechanical stresses to which they will be exposed. In general, it is advisable to round or reinforce the edge.
The choice of adhesive is determined based on placement support and use, distinguishing between interior and exterior.
Summary of recommendations:
Generic adhesive according to EN-12004
In order for Dekton to perform well, it is necessary for the material to be installed appropriately, following the steps found in our Large Format Facing Manual.
Having a correct support, choosing the necessary adhesive according to the application, respecting the joints and a correct placement and installation of the pieces are the key points for the material to shine indefinitely.
Dekton is an ideal material for flooring due to the low maintenance required. After performing the final cleaning, which is necessary to eliminate waste from the installation and which requires specific products, daily maintenance can easily be carried out whether dry or wet. If you have any questions, please consult the Dekton Cleaning and Maintenance Manual for flooring. For our Grip+ treatment we have developed a specific cleaning and maintenance manual.
It is necessary to know the necessary safety rules in case of handling and preparation of the product, for which we recommend downloading the fact sheets and the manual.
If you would like to receive a free sample or tailored advice, please fill in the form.