Sensa cleaning and maintenance Sensa natural stone by Cosentino is virtually maintenance-free thanks to its stain protection, which means that no further treatment is required to protect it. Sensa cleaning Step 1 Apply neutral soap to the affected area and gently rub in a circular motion with a damp microfibre cloth. Step 2 Leave to work for a couple of minutes. Then, with a cloth, wipe off any soap residue. Finally, dry it with kitchen roll. Sensa maintenance – FAQs In case of damage, how do I repair the surface? Due to the high absorption capacity of the product (up to 5 mm), no action would be required in most cases. Only in extreme cases, should the product be re-applied. In any case, it is advisable to have this task carried out by a specialist in order to achieve the best results. Can I place hot objects directly on a Sensa surface? Do not place very hot objects directly on the worktop. It is recommended to use trivets when placing hot objects on the surface in order to avoid damaging the stone. My Sensa surface has been scratched with a metal container. How do I clean it? The scratch has left a metal mark on the surface. So cleaning is needed to get the metal stain out. To do this, dilute a metal cleaner with water and use the mixture with a wet blue scouring pad (always in a circular motion). You can also use cleaning vinegar or an anti-limescale product. Can I use Sensa to clad floors and walls? Yes, Sensa can be used for both flooring and wall cladding. But please note that due to the anti-stain treatment of the stone, in flooring areas with high traffic, it will eventually deteriorate. Can I clean Sensa with bleach? The use of bleach or other aggressive cleaning products is not recommended.